Healthy home paint: why mineral walls breathe
Updated: Nov 12
Short answer: a healthy home paint for Australian conditions is one that adds nothing harmful to your indoor air and doesn't trap moisture in your walls. Silicate (mineral) paints like KEIM Innostar do both. They contain zero VOCs and no plasticisers, solvents or biocides, and they stay highly vapour-permeable, so walls can dry out instead of growing mould.
We spend most of our lives inside. The walls around us are the largest surface in every room, and what we coat them with matters more than most people think. This guide explains what makes a paint ‘healthy’, why breathability matters so much in Australia's climate, and where mineral paint fits.
Why does indoor air matter so much in Australian homes?
The Australian Academy of Science's 2025 indoor air quality report notes that Australians spend around 90% of their time indoors. That makes the air inside our homes the air we breathe most.
Moisture is the other half of the story. According to The Conversation, the World Health Organization estimates that 10–50% of homes in countries like Australia are affected by damp and mould. In the Australian Rental Housing Conditions Dataset, 27% of renters reported mould and 21% reported damp.

What makes a paint ‘healthy’?
Most people start and finish with VOCs. Low VOC matters, but it's only part of the picture. When we assess a paint for a healthy home, we look at four things:
What it releases: VOCs, solvents and odour during and after application.
What it contains: plasticisers, preservatives and biocides that stay in the film for the life of the wall.
How it handles moisture: whether water vapour can pass through the coating or gets trapped behind it.
How it ages: whether it attracts dust, needs frequent recoating, or breaks down into microplastics.
A paint can be ‘low VOC’ and still be a plastic film. We cover that in more detail in why low VOC doesn't mean plastic-free.
How does mineral paint let walls breathe?
Conventional acrylic paints form a plastic skin on top of the wall. Silicate paints work differently. The binder reacts chemically with mineral surfaces such as render, plaster and masonry, and becomes part of the substrate rather than a layer sitting on it.
The result is a microporous, highly vapour-permeable finish. Moisture inside the wall can escape as vapour instead of building up behind a film, where it causes blistering, peeling and the damp conditions mould needs.

The takeaway: a healthy wall is one that can dry. Choose a coating that adds nothing harmful to the air and lets moisture out, not one that seals it in.
What's actually in KEIM Innostar?
KEIM Innostar is our silicate interior paint, developed for living spaces, schools and healthcare. Based on the Innostar product information, it is:
Zero VOC, and practically odour-free once applied.
Free from plasticisers, solvents and preservatives, with no biocides.
Highly vapour-permeable, so walls can regulate moisture.
Naturally alkaline, which hinders mould growth on the surface without added fungicides.
Antistatic, so it attracts less dust than plastic-based finishes.
Incombustible (Euroclass A2).
Cradle to Cradle Certified® V5 at Silver level, with Gold for Material Health.
Coverage is efficient too: two coats typically do the job where acrylic systems often need three. For a deeper comparison, read mineral paint vs acrylic paint.
Is mineral paint good for mould-prone homes?
Paint alone won't fix a leak, rising damp or poor ventilation, and those always need sorting first. Once they're addressed, a breathable, alkaline finish helps walls stay dry and gives mould less to work with. We explain the mechanism in naturally mould-resistant paint.
The same thinking applies in the most demanding settings. See how silicate finishes were used at the Joan Kirner Women's and Children's Hospital.
Home is where the walls breathe
We made a short video about what this means for a family home: a weatherboard house, a few generations, and a fresh coat that lets it breathe.

Key points
Australians spend around 90% of their time indoors, so wall coatings directly shape the air you breathe.
Low VOC is a starting point. Also check for plasticisers, biocides and how the paint handles moisture.
Silicate paints bond with mineral surfaces and stay highly vapour-permeable, helping walls dry out.
KEIM Innostar is zero VOC, biocide-free, odour-free, antistatic and Cradle to Cradle Certified®.
Fix the moisture source first; then a breathable finish helps keep it that way.
Frequently asked questions
What is the healthiest type of paint for a home in Australia?
There's no single answer for every surface, but for interior walls look for a paint that is zero VOC, free from plasticisers and biocides, and vapour-permeable. Silicate (mineral) paints such as KEIM Innostar tick all of those boxes.
Is mineral paint the same as limewash?
No. Both are mineral-based and breathable, but silicate paint bonds chemically with the substrate, giving a more durable, washable and colour-stable finish than traditional limewash.
Can I use mineral paint over existing acrylic paint?
KEIM has systems designed for previously painted surfaces, including sound acrylic coatings. The right primer depends on the existing finish, so talk to our technical team before you start.
Does mineral paint smell when you apply it?
KEIM Innostar is practically odour-free, which is why it's popular in bedrooms, nurseries, schools and hospitals where rooms need to be back in use quickly.
Will mineral paint stop mould?
It won't fix the cause of damp, such as leaks or poor ventilation. But its alkalinity and breathability make the surface less hospitable to mould, without added biocides.
Is mineral paint more expensive?
The tin price can be higher, but two coats usually replace three and the finish lasts, so the cost over the life of the wall is often comparable or lower.

Talk to us about your project
Planning a renovation or a new build? Learn more about KEIM and healthy buildings, or contact our technical team for colour advice, specifications and samples.
Sources: Australian Academy of Science – Indoor Air Quality report (2025); The Conversation – Sudden mould outbreak after all this rain?; KEIM Innostar product information.
By the KEIM Australia technical team. Last updated November 2026.


Comments