Product Range - Keim Universal Render
Available upon request
KEIM Universal Render | ||
Renovation and thin layer facade render, based on lime cement with a small amount of organic additives and fiber reinforcement. Standard render to DIN EN 998-1, mortar category CS III. For renovation and repair of sound existing renders (including synthetic resin renders) and sound existing paint coats (including synthetic resin paint coats) for interior and exterior areas. Grain size: 0 – 1.3 mm |
Colour shade Natural Application Consumption Packaging |
|
Download technical datasheet | ||
KEIM Universal Render Fine | ||
KEIM Universal Render Fine is a renovation and thin layer exterior wall render, based on lime cement with organic additives and fiber reinforcement (Standard render to DIN EN 998-1). KEIM Universalputz Fine corresponds to mortar category CS III (P II acc. to DIN 18550). Renovation and repair of:
|
Application Mix with blunger or render mixing machine. KEIM Universalputz Fine may be textured or felt-floated (when felt-floating, use firstly a coarse and then a fine sponge float). Consumption Packaging |
|
Download technical datasheet | ||
KEIM Glassfibre Reinforcing Mesh | ||
Ready to use reinforcing mesh for both localised added crack resistance and protection of elevations in vulnerable areas. | Consumption 1 linear metre per square metre (supplied in rolls 1 metre wide & 50 metres long) |
|
Download technical datasheet | ||
KEIM NHL-Kalkputz-Fein (Lime render, fine) | ||
Dry bagged mortar to DIN EN 998-1, based on sand, white lime and highly hydraulic natural lime, mortar category CS II. KEIM NHL-Kalkputz-Fein is used as topcoat render for interior, exterior and damp areas, as bonding bridge for subsequently applied lime renders or as topcoat render with elevated adhesion properties for finishings. Grain size: 0 – 0.6 mm |
Colour shade Natural Application Consumption Packaging |
|
Download technical datasheet | ||
KEIM Porosan®-Ausgleichsputz-NP (levelling render) | ||
Dry bagged mortar to DIN 18557 and DIN EN 998- 1. Base render WTA to use in conventional render mixing pumps without additional equipment. Supplementary product for KEIM Porosan-Trass-Sanierputz-NP or KEIM Porosan-HF-Sanierputz for the repair of salt damaged rendered surfaces. To level bigger cavities, irregular masonry and/or to serve as salt storage in case of particularly high underground salination. | Colour shade Grey Application Consumption Packaging |
|
Download technical datasheet | ||
KEIM Brillantputz-Glattputz (Smooth plaster finish) | ||
High-quality, mineral, thin-layer, lightweight plaster with a smooth texture, based on white lime, white cement and valuable marble aggregates.
In combination with KEIM Putzgrund as top coat on mineral substrates. Top coat for ETICS. |
Colour shade Natural white, KEIM Palette exclusiv, luminosity > 30, not available in full colours. Consumption Packaging |
|
Download technical datasheet | ||
KEIM Brillantputz-Rillenputz (Striated plaster finish) | ||
High-quality, mineral, thin-layer, lightweight plaster with a striated texture, based on white lime, white cement and valuable marble aggregates.
In combination with KEIM Putzgrund as top coat on mineral substrates. Top coat for ETICS. |
Colour shade Natural white, KEIM Palette exclusiv, luminosity > 30, not available in full colours Consumption Packaging |
|
Download technical datasheet | ||
KEIM Brillantputz-Rauputz (Rough plaster finish) | ||
High-quality, mineral, thin-layer, lightweight plaster with a rough texture, based on white lime, white cement and valuable marble aggregates.
In combination with KEIM Putzgrund as top coat on mineral substrates. Top coat for ETICS. |
Colour shade Natural white, KEIM Palette exclusiv, luminosity > 30, not available in full colours. Consumption Packaging |
|
Download technical datasheet | ||