Product Range - Concretal Lasur

KEIM Concretal Dilution
KEIM Concretal-W Dilution for Concretal-W, Concretal-W-Grob, Concretal-Lasur and KEIM Contact-Plu Packaging
5 l and 20 l containers
     Download technical datasheet
     
KEIM Concretal®-Lasur
Sol-silicate one-component paint for translucent or opaque thin layer coatings. Especially economical, preventive concrete protection.
For a translucent finish or to equalize visual shortcomings dilutions in any ratio with Concretal-Fixativ are possible. Protection grade: Weathering protection
Colour shade
Concrete grey,
KEIM Palette exclusiv

Application
Brush, roller

Consumption
For two coats:
approx. 0.25 l/m² Concretal-Lasur
+ 0.04 l KEIM Concretal-Fixativ

Packaging
1.5 l and 15 l containers


     
     
KEIM Concrete Cleaner
A silicic acid based cleaning agent to remove dirt and release agent residues on concrete surfaces. Can also be used on render substrates. Reacts, when applied, to form harmless compounds. Application
Brush

Consumption
0,05 l/m²

Packaging
5 l and 20 l container
     Download technical datasheet
     
KEIM Concretal MKH
Mineral, cement-containing, one-component corrosion protection and bonding bridge to German guidelines ZTV-ING PCC I and II.
For the use as mineral corrosion protection on concrete reinforcement and as bonding bridge for a noninterlocking bond in combination with
KEIM Concretal-Mörtel-R in concrete repair.
Application
Brush

Consumption
0,05 l/m²

Packaging
5 l and 20 l container
     Download technical datasheet
     
KEIM Fine Finishing Mortar
For application according to PCC II of the German guidelines ZTV-ING.
To equalise repaired areas (mortar) and to close pores and blowholes by scratch filling. As full-cover filling from 0.5 up to 4 mm layer thickness. For use as blowhole grout with the addition of Concretal-Spezialvergütung to the mixing water. Resistant to water, frost and de-icing salt. Can be applied by wet spraying.
Colour shade
Grey

Application
Trowel, filling knife, wet spraying

Consumption
1.75 kg/m² and mm layer thickness

Packaging
25 kg sacks
     Download technical datasheet
     
KEIM Repair Mortar
Repair mortar for concrete in building construction to repair defects; layer thicknesses from 5 to 80 mm (multilayer). Applicable without corrosion protection and bonding bridge, excellent adhesive power, stable in wall and overhead areas, can be smoothed like a coarse filler. Suited for the repair of lightweight concrete. Colour shade
Grey

Application
Trowel, filling knife

Consumption
1.52 kg/m² and mm

Packaging
25 kg sacks
     Download technical datasheet
     

back